Operation Panel
The operation panel is comprised of six LED digital tube displays
and four
keys
and
, one red lamp
, and one green lamp, which
are used to display all kinds of statuses of the system and to set
parameters.
Figure 5.1 Operation Panel
Operations are layered operations as follows:
refers
to
the
back,exit
and
cancel
of
a layer;
refers to the advance, entry and confirmation of the hierarchy
and
refers to increasing or decreasing a sequence number or a value.
When the red indicating lamp
is on, it means that there is an alarm; and the alarm is displayed on the
digital tube.
When the green indicating lamp
, it means the motor is in enable working state.
●
When the decimal points at the lower right corner of the d igital tube, it means a parameter is being
modified.
●
When the red indicating lamp Alm is on and the alarm n umber
‘
Err--xx
'
is flashing, there is a driver
alarm. Cut off the power supply and find out the cause of the alarm.
Chapter V Display and Operation
Enter
38
