Atest Gaz Teta MOD Control 1, User Manual

Page: 27 / 36

www.atestgaz.pl
The register numbers for subsequent detectors are given below.
Description Type / comments Register Description Type / comments Register
Detector 2 Analogously to the detector 1 –
channel 1 40012 Detector 27 Analogously to the detector 1 –
channel 1 40237
Detector 3 40021 Detector 28 40246
Detector 4 40030 Detector 29 40255
Detector 5 40039 Detector 30 40264
Detector 6 40048 Detector 31 40273
Detector 7 40057 Detector 32 40282
Detector 8 40066 Detector 33 40291
Detector 9 40075 Detector 34 40300
Detector 10 40084 Detector 35 40309
Detector 11 40093 Detector 36 40318
Detector 12 40102 Detector 37 40327
Detector 13 40111 Detector 38 40336
Detector 14 40120 Detector 39 40345
Detector 15 40129 Detector 40 40354
Detector 16 40138 Detector 41 40363
Detector 17 40147 Detector 42 40372
Detector 18 40156 Detector 43 40381
Detector 19 40165 Detector 44 40390
Detector 20 40174 Detector 45 40399
Detector 21 40183 Detector 46 40408
Detector 22 40192 Detector 47 40417
Detector 23 40201 Detector 48 40426
Detector 24 40210 Detector 49 40435
Detector 25 40219 Detector 50 40444
Detector 26 40228 - -
Table 16: Register numbers of subsequent detectors
8 Life cycle
8.1 Transport
The device should be transported in the same way as new devices of this type. If the original box or another
protection (e.g. corks) is not available, it is necessary to secure the device against shocks, vibrations and
moisture on one's own, using other equivalent methods.
Transport of the device should be carried out under the environmental conditions described in the table 17.
8.2 Installation
Mount in the control cabinet on the DIN 35 rail or place in the junction box in a place accessible to
authorized operators, however, if possible, in such a way as to make it difficult for unauthorized persons to
access it. It is recommended to use such mounting height which allows easy access to the unit.
s. 27|31
User's Manual: POD-051-ENG R02