www.atestgaz.pl
5.2
User interface structure
The user manual structure is shown on the illustration below.
The main view available on the HMI display is the system view (see section 5.4). Upon the system power up
that view is displayed right after the initial self-test of HMI is completed (see section 5.3). The system view
enables navigation to the following screens:
view of detector layout (see section 5.5), upon depressing the button
,
menu of the control module (see section 5.8), by double depressing of the button
,
user interface test (see section 5.3), by simultaneous depressing the buttons
.
s. 15|31
User's Manual: POD-051-ENG R02
Figure 9: Interface structure
1. Control Unit
information
4.Level 2
password
7.
Buzzer
settings
Firmware
Time till sound
alarm reactivation
Level 2 (password protected) functions
No-password functions
System
view
Interface
Test
Device power up
Simultaneously
Menu
Devices
view
5. Number of
detectors
Internal
buzzer
Time till failure
warning reactivation
2. History
Detector
status
Control unit
status
10. Log out
9. GTW
settings
8.
Settings for
outputs
Network
address
Protocol
Transmission
rate
Frame format
Parity check
3. Language
6. Number of
v. controlers
