ATEN OL1000HV, User Manual

Page: 13 / 71

Chapter 1. Introduction
3
Features
 True double-conversion – Output power factor is 1, which means all
of the power supplied is being used for productive work and makes
work the most efficient
 Output voltage regulation < 1% – Provides higher performance and
efficiency for critical applications
 Programmable power management outlets – Users can easily and
independently control load segments. During power failure, this
feature enables users to extend battery time to mission-critical
devices by shutting down the noncritical devices

Emergency power off function (EPO) – EPO connector at rear panel
allows emergency UPS Power Off from a remote location
 SNMP + USB + RS-232 multiple communications – Allows either
USB or RS-232 communication port to work with SNMP interface
simultaneously
 Hot swappable battery design – All potential UPS maintenance,
including complete power module exchange, can be performed
without powering down connected equipment. As long as utility
power is on, you may leave the UPS and connected equipment on
while replacing a new battery

ECO mode for energy saving – Offers up to 97% efficiency to cut
energy usage and cost. UPS power application via static bypass,
timely returning to online double conversion when the need arises
 Provides over voltage cut-off protection and surge immunity by
MOV for full time equipment protection
 High power factor charger up to 1000W capacity with very low
ripple current when charging battery

Multi-functional LCD interface – Displays immediate, detailed
information on input voltage, battery capacity, power status, battery
status, operating status and assessed backup runtime, etc.
 Smart battery charger design to optimize battery performance – It
will adjust charging voltage according to outside temperature and
extend the useful service life of batteries.