ATEN CS1708i User Manual Download Page 152

Page: 152 / 216

CS1708i / CS1716i User Manual

136

3. After filling in the form (all fields are required), click

Create

A self-signed certificate based on the information you just provided is now
stored on the KVM over IP switch.

4. Click

Get CSR

, and save the certificate file (csr.cer) to a convenient

location on your computer.
This is the file that you give to the third party CA to apply for their signed
SSL certificate.

5. After the CA sends you the certificate, save it to a convenient location on

your computer. Click

Browse

to locate the file; then click

Upload

to store

it on the KVM over IP switch.

Note:

When you upload the file, the KVM over IP switch checks the file to
make sure the specified information still matches. If it does, the file is
accepted; if not, it is rejected.

If you want to remove the certificate (to replace it with a new one because of a
domain name change, for example), simply click

Remove CSR

Common Name

mycompany.com

Note:

This must be the exact domain name of the site that you

want the certificate to be valid for. If the site’s domain name is
www.mycompany.com, and you only

Note:

specify

mycompany.com, the certificate will not be valid.

E-mail Address

[email protected]

Information

Example

Summary of Contents for CS1708i

























































































































































































































Search results

Summary of Contents for CS1708i

Reviews:

Related manuals for CS1708i

Brands by name

Popular brands

ATEN CS1708i, User Manual

Search results

Summary of Contents for CS1708i

Reviews:

Related manuals for CS1708i

Brands by name

Popular brands