4. OSD Operation
41
Invoking Hotkey Mode
All Hotkey operations begin by invoking
Hotkey Mode
. Invoking Hotkey
Mode takes three steps:
1. Hold down the
Num Lock
key;
2. Press and release the
minus
key;
3. Release the
Num Lock
key:
[Num Lock] + [-];
Note:
1. The sequence uses the default hotkey invocation method. If you
selected the alternate hotkey invocation keys (see
page 33), you would use [Ctrl] and [F12], instead.
2. The Minus (or F12) key must be released within one half second,
otherwise Hotkey invocation is automatically cancelled.
When Hotkey Mode is active:
The Caps Lock, and Scroll Lock LEDs flash in succession to indicate
Hotkey Mode is active. They stop flashing and revert to normal status
when you exit Hotkey Mode.
A Command Line appears on the monitor screen. The command line
prompt is the word
Hotkey:
in white text on a blue background, and
displays the subsequent Hotkey information that you key in.
Ordinary keyboard and mouse functions are suspended – only Hotkey
compliant keystrokes (described in the sections that follow), can be input.
Pressing
[Esc]
exits Hotkey Mode.
Summary of Contents for CS1708i
