ATEN CS1708i, User Manual

Page: 135 / 216

Chapter 9. Device Management
119
IP Installer
The IP Installer is an external Windows-based utility for assigning IP addresses
to the CS1708i / CS1716i.
Click one of the radio buttons to select
Enable
,
View Only
, or
Disable
for the
IP Installer utility. See
IP Installer
, page 179, for IP Installer details.
Note: 1. If you select
View Only
, you will be able to see the CS1708i / CS1716i
in the IP Installer’s Device List, but you will not be able to change the
IP address.
2. For security, we strongly recommend that you set this to
View Only
or
Disable
after each use.
Service Ports
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow. If a port other than the default is
used, users must specify the port number as part of the IP address when they
log in. If an invalid port number (or no port number) is specified, the CS1708i
/ CS1716i will not be found. An explanation of the fields is given in the table
below:
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. Service ports cannot have the same value. You must set a different
value for each one.
3. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
Field Explanation
Program This is the port number for connecting with the WinClient
ActiveX Viewer, WinClient AP, Java Web Start, Java Client AP,
or via Virtual Media. The default is 9000.
HTTP The port number for a browser login. The default is 80.
HTTPS The port number for a secure browser login. The default is 443.