ATEN CS1708i, User Manual

Page: 186 / 216

CS1708i / CS1716i User Manual
170
 If an extension cord is used with this device make sure that the total of the
ampere ratings of all products used on this cord does not exceed the
extension cord ampere rating. Make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
 To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
un-interruptible power supply (UPS).
 Position system cables and power cables carefully; Be sure that nothing
rests on any cables.

Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
 Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
 If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
 The power cord or plug has become damaged or frayed.
 Liquid has been spilled into the device.
 The device has been exposed to rain or water.
 The device has been dropped, or the cabinet has been damaged.
 The device exhibits a distinct change in performance, indicating a need
for service.
 The device does not operate normally when the operating instructions
are followed.

Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
 Do not connect the RJ-11 connector marked “UPGRADE” to a public
telecommunication network.