ATEN CS1708i, User Manual

Page: 145 / 216

Chapter 9. Device Management
129
To add a MAC filter, do the following:
1. Click Add . A script prompt dialog box.
2. Specify the MAC address in the dialog box, then click OK .
3. Repeat these steps for any additional MAC addresses you want to filter.

IP Filter / MAC Filter Conflict
If there is a conflict between an IP filter and a MAC filter – in other words,
if a computer’s address is allowed by one filter but blocked by the other –
then the blocking filter takes precedence (the computer’s access is
blocked).
 Modifying Filters
To modify a filter, select it in the IP Filter or MAC Filter list boxes and
click
Modify . The Modify dialog box is similar to the Add dialog box.
When it comes up, simply delete the old address(es) and replace it with the
new one(s).

Deleting Filters
To delete a filter, select it in the IP Filter or MAC Filter list box and click
Delete .