ATEN CS1708i, User Manual

Page: 27 / 216

1. Introduction
11
No. Component Description
1 Daisy Chain Port When Daisy Chaining Units (see
Daisy Chaining
,
page 21), the daisy chain cable plugs in here.
2 KVM Port Section The KVM cables that link to the computers plug in
here.
Note: The shape of these 15-pin connectors has been
specifically modified so that only custom KVM cables
designed to work with this switch can plug in.
(See
Cables
, page 6, for details.) Do NOT attempt to
use ordinary 15-pin VGA connector cables to link
these ports to the computers.
3 Grounding Terminal The grounding wire used to ground the CS1708i /
CS1716i attaches here.
4 Cable Tie Slot If you want to use a cable tie to gather the cables
together, you can run it through this slot to attach it to
the unit.
5 Power Jack The power adapter cable plugs in here.
6 LAN Port The cable that connects the CS1708i / CS1716i to the
Internet, LAN, or WAN plugs in here. The LED on the
left side of the port indicates data transmission speed:
Orange
for 10 Mbps;
Green
for 100 Mbps. The LED on
the right side of the port flashes
Green
when the
switch is being accessed remotely.
7 Console Port The custom Console Cable set that connects the
console monitor, keyboard, and mouse to the switch
plugs in here.