AT&T MERLIN MAIL System Programming And Maintenance Manual Download

Page: 62 / 224

Installation

17.

18.

19.

20.

21.

22.

Tighten the captive retaining screw on the wall mount and cable
manager bracket into the mounting hole on the lower right side of the

cabinet.

Plug in the modular telephone cords from the MERLIN MAIL—ML ports

to the correct MERLIN LEGEND jacks. Be sure to connect the cords
from lowest-numbered port to lowest-numbered jack and

highest-numbered port to highest-numbered jack. Refer to MERLIN
LEGEND System Form 2a: System Numbering—Station Jacks for jack

assignments.

Reconnect the modem cable to the COM1 port.

Plug in the MERLIN MAIL—ML unit power cord.

Switch the MERLIN MAIL—ML unit power on.

If the unit has been previously programmed, perform the Acceptance

Tests in Chapter 5.

2-20

Adding or Replacing a Voice-Processing Card

Summary of Contents for MERLIN MAIL

































































































































































































































Search results

Summary of Contents for MERLIN MAIL

Reviews:

Related manuals for MERLIN MAIL

Brands by name

Popular brands

AT&T MERLIN MAIL, System Programming And Maintenance Manual

Search results

Summary of Contents for MERLIN MAIL

Reviews:

Related manuals for MERLIN MAIL

Brands by name

Popular brands