AT&T MERLIN MAIL, System Programming And Maintenance Manual

Page: 128 / 224

MERLIN MAIL—ML System Programming
11.
12.
13.
14.
15.
Record the new submenu script (up to two minutes).
[1] after recording.
The Message Editing Menu plays.
Enter one of the following selections or go to Step 14:
— [2][3] to play back the new submenu script.
— [2][1] to re-record the new submenu script. Go back to Step 12.
— [*][D] (or [*][3] ) to delete the new submenu script. Re-record
the new submenu script.
[*][#] to approve the submenu script,
The message “Approved” plays.
If the MERLIN MAIL—ML system was setup for monolingual operation,
the Submenu Administration Menu plays. This procedure is complete.
If the MERLIN MAIL—ML system was setup for bilingual operation, the
system prompts you to record the submenu script in the secondary
system language. Go to Step 15.
(Bilingual Operation Only) Repeat Steps 11 through 14 to record the
script for the secondary system language.
The Submenu Administration Menu plays.
3-66
Programming the Automated Attendant Menus