RX3041H User’s Manual
Chapter 9. Configuring Firewall/NAT Settings
77
9.8.2.5
IP Pool Example
Internet
ISR
192.168.1.10
Inside FW
Outside FW
192.168.1.11
192.168.1.12
MISgroup2
MISgroup1
Figure 9.27. Network Diagram for IP Pool Configuration
1. Open the IP Pool configuration page to create two IP groups – see Figure 9.28.
Figure 9.28. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2
2. Associate an IP pool to firewall ACL rules – inbound, outbound or group ACL by selecting “IP
Pool” from the Source IP Type drop-down list and then choose an IP pool from the IP pool drop-
down list. In this example, IP pool is used to associate to source IP; however, it can be used to
associate to destination IP as well. As shown in Figure 9.29, MISgroup1 is not allow to play
networked game, Quake-II at all times.
