Chapter 10. Configuring Remote Access
RX3041H User’s Manual
86
Field
Description
User State
Click on the Enable or Disable radio button to enable or disable the user.
Disabling the user will force the user to be disconnected. Further login from
that specific user will be disabled. Enabling the user will allow the specific
user to log in.
Password
Enter the User’s password.
Confirm Password
Enter the User’s password again for confirmation. Make sure that you enter
the same password as what you entered in the “Password” field.
10.2.2 Add a User Group and/or a User
To add a user group and a new user, follow the instructions below:
1. Open the User Group configuration page by clicking the
Remote
Access
Î
User Group
menu.
2. Select “Add New User Group” from the user group drop-down list.
3. Enter a name into the User Group Name field. Make sure that this name
is unique among the existing groups. Note that the group name is case
sensitive. For example, Group1 and group1 are treated as separate
groups.
4. Click on the “Enable” or “Disable” radio button in the Group State field to enable or disable this
group.
5. Enter inactivity timeout period. Default is 300 seconds.
6. If you want to add a user to this newly created group, continue with the following steps; otherwise,
jump to step 12 to complete the configuration.
7. Select “Add New User” from the user drop-down list.
8. Enter a unique user name in the User Name field.
9. Click on the “Enable” or “Disable” radio in the User State field to enable or disable this user.
10. Enter the password in the Password field for this user.
11. Confirm the password by entering again the password in the Confirm Password field.
User Group
drop-down list
User drop-
down list
Figure 10.1. User Group Configuration
12. Click on the
button to create the new group and/or the new user.
To add a new user, follow the instructions below:
