Asus RS720-E7-RS24-EG User Manual Download Page 165

Page: 165 / 202

ASUS RS720-E7-RS24-EG

7-3

Locate the RAID driver and place a blank, high-density floppy disk to the floppy disk

drive.

Press <Enter>.

Follow screen instructions to create the driver disk.

To create a RAID driver disk in Windows

environment

1. Start Windows

2. Place the motherboard support DVD into the optical drive.
3. Go to the Make disk menu, and then select the type of RAID driver disk you want to

create.

4. Insert a floppy disk into the USB floppy disk drive.

5. Follow succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid computer virus infection.

To create a RAID driver disk in Red Hat

Enterprise Linux server environment

Insert a blank formatted high-density floppy disk to the USB floppy disk drive.

Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from the

following path in the support DVD:

For LSI MegaRAID Driver

\Drivers\C60x LSI RAID\Driver\makedisk\Linux

3. Eject the floppy disk.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands

Asus RS720-E7-RS24-EG, User Manual

Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands