Asus RS720-E7-RS24-EG User Manual Download Page 176

Page: 176 / 202

7-14

Chapter 7: Driver installation

7.2

Intel

chipset device software installation

This section provides the instructions on how to install the Intel

chipset device software on

the system.
You need to manually install the Intel

chipset device software on a Windows operating

system.
To install the Intel

chipset device software:

Restart the computer, and then log on with Administrator privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run

the support DVD.

Click the item Intel Chipset Device Software from the menu.

The Intel(R) Chipset Device Software window appears. Click Next to start installation.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Brands by name

Popular brands

Asus RS720-E7-RS24-EG, User Manual

Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Brands by name

Popular brands