Asus RS720-E7-RS24-EG User Manual Download Page 178

Page: 178 / 202

7-16

Chapter 7: Driver installation

7.3

Intel

Network Connections Software installation

This section provides the instructions on how to install the Intel

Network Connections

Software on the system.
You need to manually install the Intel

Network Connections Software on a Windows

operating system. To install the Intel

Network Connections Software:

Restart the computer, and then log on with Administrator privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the Drivers menu if Autorun is enabled in your computer.

•

Windows

automatically detects the LAN controllers and displays a New Hardware

Found window. Click Cancel to close this window.

•

If Autorun is NOT enabled in your computer, browse the contents of the support DVD

to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE

to run the DVD.

Click the Intel

Network Connections Software to begin installation.

Click Install Drivers and Software option to begin installation.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands

Asus RS720-E7-RS24-EG, User Manual

Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands