Asus RS720-E7-RS24-EG User Manual Download Page 186

Page: 186 / 202

7-24

Chapter 7: Driver installation

To install the Intel

I350-AM4/I350-AM2/I210 Gigabit Adapter driver on Windows

Server

2012:

Restart the computer.

2. Log on with Administrator privileges.
3.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click Intel

I350-AM4/I350-AM2/I210 Gigabit Adapter Driver in the Drivers menu of the

main screen to start the installation.

Click Next to continue.

From the Program Maintenance window,

select Modify then click Next.

Select the options you want to install then

click Next to continue.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands

Asus RS720-E7-RS24-EG, User Manual

Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Related manuals for RS720-E7-RS24-EG

Brands by name

Popular brands