manualshive.com logo in svg

Asus RS720-E7-RS24-EG, User Manual

Share
Download
Asus RS720-E7-RS24-EG User Manual Download Page 159

ASUS RS720-E7-RS24

6-35

6.4.2 

Changing a Volume Type

To change the volume type in Volume Properties:
1. 

Click the SATA array items you want to change in Volumes field.

2 

From the Volume Properties field, select Type:RAID 1 Change type.

We recommend a lower stripe size for server systems, and a higher stripe size for 

multimedia computer systems used mainly for audio and video editing.

3. 

You can change the Name, Select the new volume type, and Select additional disks to 

include in the new volume if needed.

4. 

Select the Data stripe size for the RAID array (for RAID 0, 10 and 5 only), and click OK. 

The available stripe size values range from 4 KB to 128 KB. The following are typical 

values: 

RAID 0: 128KB

 

RAID 10: 64KB

 

RAID 5: 64KB

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands