manualshive.com logo in svg

Asus RS720-E7-RS24-EG, User Manual

Share
Download
Asus RS720-E7-RS24-EG User Manual Download Page 173

ASUS RS720-E7-RS24-EG

7-11

Preparing the Linux Driver

Ensure that there is another computer with a Linux-based OS to create the RAID driver. When 

creating the RAID driver, you may refer to the examples below which uses a 64bit SUSE 

Linux system to create a 64bit RAID driver for SUSE11 sp1.

1.   Copy the image file into the Linux system. 

Example:  megasr-15.00.0120.2012-1-sles11-ga-x86_64.img

2. 

Create a folder.

 

Example: image 

3. 

Mount the image file into the image folder using this command format: 

 

mount -oloop [image file name] image

 

Example: mount -oloop megasr-15-15.00.0120.2012-1-sles11-ga-x86__64.img image  

4. 

Copy the contents of the image directory, labeled as 01, into  a FAT32 USB drive.

5. 

Rename the 01 folder to CD Image.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands