Asus RS500-E9 Series User Manual Download Page 44

Page: 44 / 166

Chapter 2: Hardware Information

2-24

2.6

Cable connections

•

The bundled system cables are pre-connected before shipment. You do not need to

disconnect these cables unless you will remove pre-installed components to install

additional devices.

•

Refer to Chapter 4 for detailed information on the connectors.

Standard cables connected to the motherboard

24-pin ATX power connector (from power supply to motherboard)

8-pin 12V power connector (from power supply to motherboard)

System fan connector (from system fan to motherboard)

USB connector (from motherboard to front I/O board)

5. SATA

connector (system default; from motherboard to backplane)

System auxiliary panel connector (from motherboard to front I/O board)

System panel connector (from motherboard to front I/O board)

Mini-SAS HD connector (from motherboard to backplane)

Summary of Contents for RS500-E9 Series







































































































































































Search results

Summary of Contents for RS500-E9 Series

Reviews:

Asus RS500-E9 Series, User Manual, Page: 44 / 166

Search results

Summary of Contents for RS500-E9 Series

Reviews: