Asus RS500-E9 Series User Manual Download Page 125

Page: 125 / 166

5-47

ASUS RS500-E9 Series

5.11

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then

press <Enter> to display the submenu.

IPMI Hardware Monitor

Allows you to run the IPMI hardware monitor.

Start EzFlash

Allows you to run ASUS EzFlash BIOS ROM Utility when you press <Enter>. Refer to the

ASUS EzFlash Utility section for details.

5.12

Save & Exit menu

The Exit menu items allow you to save or discard your changes to the BIOS items.

Discard Changes and Exit

Exit System setup without saving any changes.

Save Changes and Reset

Exit System setup after saving the changes.

Restore Defaults

Restore/load default values for all the setup options.

Pressing <Esc> does not immediately exit this menu. Select one of the options from this

menu or <F10> from the legend bar to exit.

Summary of Contents for RS500-E9 Series







































































































































































Search results

Summary of Contents for RS500-E9 Series

Reviews:

Asus RS500-E9 Series, User Manual, Page: 125 / 166

Search results

Summary of Contents for RS500-E9 Series

Reviews: