Asus RS400-E8-PS2 User Manual Download Page 91

Page: 91 / 178

ASUS RS400-E8-PS2, RS400-E8-PS2-F

5-17

5.4.6 APM

Restore AC Power Loss [Last State]

When set to [Power Off], the system goes into off state after an AC power loss. When set

to [Power On], the system will reboot after an AC power loss. When set to [Last State], the

system goes into either off or on state, whatever the system state was before the AC power

loss.

Configuration options: [Power Off] [Power On] [Last State]

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Power On By Ring [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Enabled], the items

RTC Alarm Date (Days) and Hour/

Minute/Second

will become user-configurable with set values.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands