Asus RS400-E8-PS2 User Manual Download

Page: 171 / 178

7-25

ASUS RS400-E8-PS2, RS400-E8-PS2-F

7.7 Intel

Rapid Storage Technology enterprise 4.0

installation

This section provides the instructions on how to install the Intel

Rapid Storage Technology

enterprise 4.0 on the system.

You need to manually install the Intel

Rapid Storage Technology enterprise 4.0 utility on a

Windows

operating system.

To install the Intel

Rapid Storage Technology enterprise 4.0 utility:

Restart the computer, and then log on with

Administrator privileges.

Insert the motherboard/system support DVD to the optical drive, and find the utility

menu.

Click the

Intel

Rapid Storage Technology enterprise 4.0 to begin installation.

When the

Welcome to the Setup Program appears, click Next to start the installation.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands