Asus RS400-E8-PS2 User Manual Download Page 127

Page: 127 / 178

ASUS RS400-E8-PS2, RS400-E8-PS2-F

5-53

Restore Defaults

Restore/load default values for all the setup options.

Save as User Defaults

Save the changes done so far as User Defaults.

Restore User Defaults

Restore the User Defaults to all the setup options.

Boot Override

These items displays the available devices. The device items that appears on the screen

depends on the number of devices installed in the system. Click an item to start booting from

the selected device.

Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (shellx64.efi) from one of the available filesystem

devices.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands