Asus RS400-E8-PS2 User Manual Download Page 28

Page: 28 / 178

Chapter 2: Hardware setup

2-4

2.2

Central Processing Unit (CPU)

The motherboard comes with two surface mount LGA 2011-3 sockets designed for the Intel

Xeon E5-2600 v3 processor family.

2.2.1

Installing the CPU

To install a CPU:
1. Remove the air duct.

Ensure that all power cables are unplugged before installing the CPU.

•

Upon purchase of the motherboard, ensure that the PnP cap is on the socket and

the socket contacts are not bent. Contact your retailer immediately if the PnP cap

is missing, or if you see any damage to the PnP cap/socket contacts/motherboard

components. ASUS shoulders the repair cost only if the damage is shipment/transit-

related.

•

Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the LGA

2011-3 socket.

•

The product warranty does not cover damage to the socket contacts resulting from

incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP

cap.

RS400-E8-PS2

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands