Asus RS400-E8-PS2 User Manual Download Page 50

Page: 50 / 178

Chapter 3: Installation options

3-2

3.1

Tool-less Friction Rail Kit

The tool less design of the rail kit allows you to easily install the rack rails into the server rack

without the need for additional tools. The kit also comes with a metal stopping bracket that

can be installed to provide additonal support and stability to the server.

The tool-less rail kit package includes:

Installing the tool-less rack rail
To install the tool-less rack rails into the rack:

1. Secure the two fixing latches to the two sides of the server using the set of latch

screws.

The locations of the screw holes vary with different server models. Refer to your server user

manual for details.

Fixing latches

Set of screws

Tool-less rack rail

Rail components (screws included)

Latch screws Rail Washers

Rail screws

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands