Asus RS400-E8-PS2 User Manual Download Page 26

Page: 26 / 178

Chapter 2: Hardware setup

2-2

2.1

Chassis cover

2.1.1

Removing the rear cover

To open the chassis cover:
1.

Loosen the six thumbscrews on the cover with a Phillips screwdriver to release the

cover from the chassis.Keep the screws for later use.

•

Unplug the power cord from the power connector before removing the cover.

•

Be careful when removing the chassis cover. When removing any system component,

be careful with the CPU fan, chassis fan and other sharp edge to avoid hurting your

fingers.

•

The illustrations in this chapter are for reference only. The appearance may vary

depending on the model, but the installation steps are basically the same.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands