Asus RS400-E8-PS2 User Manual Download Page 33

Page: 33 / 178

2-9

ASUS RS400-E8-PS2, RS400-E8-PS2-F

Retention tab

Load lever

edge of load plate

12. Push the reght load lever down (K) ensuring that the edge of the load plate is fixed and

tucked securely under the lever (L), then

insert the right load lever under the retention

tab (M)

•

Ensure that the Thermal Interface

Material is spread in an even thin

layer.

•

Some heatsinks come with

pre-applied Thermal Interface

Material. If so, skip this step.

13. Apply some Thermal Interface Material

to the exposed area of the CPU that the

heatsink will be in contact with.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes

or touches your skin, wash it off immediately, and seek professional medical help.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands