Asus RS400-E8-PS2 User Manual Download Page 64

Page: 64 / 178

Chapter 4: Motherboard information

4-12

ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1,

8-pin EATX12V2)

These connectors are for the ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

•

DO NOT forget to connect the 24-pin and the 8-pin power plugs; otherwise, the system

will not boot up.

•

Use of a power supply unit (PSU) with a higher power output is recommended when

configuring a system with more power-consuming devices. The system may become

unstable or may not boot up if the power is inadequate.

•

This motherboard supports ATX2.0 PSU or later version.

•

Ensure that your PSU can provide at least the minimum power required by your

system.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands