Asus RS400-E8-PS2 User Manual Download Page 166

Page: 166 / 178

7-20

Chapter 7: Driver installation

5. Click

Install Drivers and Software option to begin installation.

7.5

Installing the Intel

I350-AM1/I350-AM2/I210

X540-BT2 Gigabit Adapters driver

This section provides the instructions on how to install the

Intel

I350-AM1/I350-AM2/

I210/X540-BT2 Gigabits Adapter Driver on the system.
To install the

Intel

I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Driver on the

Windows

operating system:

Restart the computer.

2. Log on with

Administrator privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run

the support DVD.

4. Click

Intel

I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Drivers in the

Drivers menu of the main screen to start the installation.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands