Asus RS162-E4 RX4, User Manual

Page: 39 / 164

ASUS RS162-E4/RX4
-1
2.6.1 Serial Port cable
The system package provides a set of COM port cable module. You can
install it into the COM1 openning on the rear panel. To install it:
1. Prepare the COM1 port cable
module from your product
package.
2. Open the top cover panel.
Connect one end of the cable
to the COM1 connector on the
board, and then fit the other end
into the COM1 openning of the
rear panel.
3. Secure the rear panel COM1 port
to the rear panel using the two
screws (see the figure).
4. Re-place the top cover panel.