Asus RS162-E4 RX4, User Manual

Page: 107 / 164

ASUS RS162-E4/RX4
-
2. In the Enter current password field, type in your current password. Press
<Enter>.
3. The cursor moves to the next field, Enter new password.
Press <Enter>. Do not type anything in this field.
4. The cursor moves to the next field, Confirm new password.
Press <Enter>. Do not type anything in this field.
5. When the confirmation message “Password has been changed” appears,
press <Enter>.
The display returns to the Security menu. Note that the password field
on top is changed to Clear.
A note about passwords
The Supervisor password is required to enter the BIOS Setup
program preventing unauthorized access. The User password is
required to boot the system preventing unauthorized use.
Forgot your password?
If you forget your password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you
need to erase the CMOS RAM, refer to section “2.6 Jumpers” for
instructions.
Password Check [Setup]
This field requires you to enter the password before entering the BIOS
setup or the system. Select [Setup] to require the password before
entering the BIOS Setup. Select [System] to require the password before
entering the system. Configuration options: [Setup] [System]
Password Lock Mode [Enabled]
When set to [Enabled], the keyboard is locked and the user has no privilege
to launch the BIOS setup utility when installing adapter cards during option
ROM initialization. Configuration options: [Disabled] [Enabled]
Removable Device Boot [Enabled]
Allows you to enable or disable booting from a legacy floppy, USB floppy, or
IDE optical drive. Configuration options: [Disabled] [Enabled]
Flash Write [Enabled]
Set this item to [Disabled] to write-protect the BIOS flash memory.
Configuration options: [Disabled] [Enabled]