Asus RS162-E4 RX4 User Manual Download Page 139

Page: 139 / 164

ASUS RS162-E4/RX4

For systems with Red Hat

Enterprise versions that are not listed

in the Makedisk menu, explore the support CD and copy the RAID

driver disk from the following path: For Intel

6321 LSI MegaRAID:

\Drivers\6321 LSI MegaRAID\Driver\Linux\megaswr-drvr-bin.tgz

For LSI 1068 SAS: \Drivers\LSI 1068\Driver\Linux\

6. Place a blank, high-density floppy disk to the floppy disk drive, then

select the type of RAID driver disk you want to create by typing the

number before the option

7. Press <Enter>.
8. Follow screen instructions to create the driver disk.

7.1.2 Installing the RAID controller driver

Windows

2000/2003 Server OS

During Windows

2000/2003 Server OS installation

To install the RAID controller driver when installing Windows

2000/2003

Server OS:
1. Boot the computer using the Windows

2000/2003 Server installation

CD. The Windows

2000/2003 Setup starts.

2. Press <F6> when the message “Press F6 if you need to install a third

party SCSI or RAID driver...” appears at the bottom of the screen.

3. When prompted, press <S> to specify an additional device.

Summary of Contents for RS162-E4 RX4





































































































































































Search results

Summary of Contents for RS162-E4 RX4

Reviews:

Asus RS162-E4 RX4, User Manual, Page: 139 / 164

Search results

Summary of Contents for RS162-E4 RX4

Reviews: