Asus RS162-E4 RX4 User Manual Download Page 122

Page: 122 / 164

Chapter 6: RAID configuration

-10

6.2.3 Integrated Striping (IS) volume

Overview

The Integrated Striping (IS) feature provides RAID 0 functionality,

supporting volumes with two to eight disks. You may combine an IS volume

with an IM or IME volume.

Creating Integrated Striping volumes

Do not combine Serial ATA and SAS disks in one volume.

To create an IS volume:
1. Turn on the system after installing all SAS hard disk drives.

2. During POST, press <Ctrl+C> to enter the SAS configuration utility.

LSI Logic Corp. MPT SAS BIOS

MPTBIOS-6.05.06.00 (2005.01.16)

Press Ctrl-C to start LSI Logic Configuration Utility...

3. The Adapter Properties screen appears. Use the arrow keys to select

RAID Properties, then press <Enter>.

Summary of Contents for RS162-E4 RX4





































































































































































Search results

Summary of Contents for RS162-E4 RX4

Reviews:

Related manuals for RS162-E4 RX4

Brands by name

Popular brands

Asus RS162-E4 RX4, User Manual

Search results

Summary of Contents for RS162-E4 RX4

Reviews:

Related manuals for RS162-E4 RX4

Brands by name

Popular brands