background image

ASUS RS162-E4/RX4

1-

1.3 Front panel features

The barebone server displays a simple yet stylish front panel with easily 

accessible features. The power and reset buttons, LED indicators, location 

switch, optical drive, and two USB ports are located on the front panel.

Refer to section  1.6.1  Front panel LEDs  for the LED descriptions.

Rack screw

Hot-swap HDD bay 1-4

USB ports

Rack screw

System button and LED

Optical drive

1.4 Rear panel features

The rear panel includes the expansion slot, system power socket, and rear 

fans. The middle part includes the I/O shield with openings for the rear 

panel connectors on the motherboard.

1.  Redundant AC power socket
2.  Rear fans
3.  PS/2 mouse port
4.  PS/2 keyboard port
5.  USB ports
6.  Serial port (for user install self)
7.  VGA port

8.  LAN port1
9.  LAN port2
10. 2 x Expansion slots
11. LAN port3(Only supports ASUS 

IMPI2.0 LAN management card)

12.Second  redundant  AC  power 

socket (Optional)

1

2

3

8

7

5

4

6

9

10

The ports for the PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit 

LAN do not appear on the rear panel if motherboard is not present.

Refer to section  1.6.2  Rear panel LEDs  for the LED descriptions.

HDD Access, LAN, Message LED

HDD LED

11

12

Summary of Contents for RS162-E4 RX4





































































































































































Reviews: