Asus RS162-E4 RX4 User Manual Download Page 120

Page: 120 / 164

Chapter 6: RAID configuration

3. The Create New Array screen shows the disks you can add to make up

the IME volume.

Integrated Mirroring Enhanced (IME) supports three to eight disks, or

seven mirrored disks plus a hot spare disk. Use the arrow key to select

a disk, then move the cursor to the RAID Disk column. To include this

disk in the array, press <+>, <->, or <Space>.

You may also specify the Hot Spare disk here. Select the disk, then

move the cursor to the Hot Spr column, then press <+>, <->, or

<Space>.

2. The Select New Array Type screen apprears. Use the arrow keys to

select Create IM Volume, then press <Enter>.

6.2.2 Integrated Mirroring Enhanced

To create an IME volume:
1. The Adapter Properties screen appears. Use the arrow keys to select

RAID Properties, then press <Enter>.

Summary of Contents for RS162-E4 RX4





































































































































































Search results

Summary of Contents for RS162-E4 RX4

Reviews:

Related manuals for RS162-E4 RX4

Brands by name

Popular brands

Asus RS162-E4 RX4, User Manual

Search results

Summary of Contents for RS162-E4 RX4

Reviews:

Related manuals for RS162-E4 RX4

Brands by name

Popular brands