Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 62

Page: 62 / 184

2-34

Chapter 2: Hardware information

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
Digital audio connector

SPDIF_OUT

SPDIFOUT

13. Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF)

port(s). Connect the S/PDIF Out module cable to this connector, then install

the module to a slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.

14. TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which can

securely store keys, digital certificates, passwords, and data. A TPM system

also helps enhance network security, protects digital identities, and ensures

platform integrity. See section “4.6.6 Security” for details.

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
TPM connector

TPM

The TPM module is purchased separately. Use the ASUS TPM module ONLY.

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands