Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 51

Page: 51 / 184

ASUS M2N32-SLI Premium Vista Edition

2-23

2.7

Connectors

2.7.1

Rear panel connectors

1. PS/2 mouse port (green).

This port is for a PS/2 mouse.

2. Serial (COM) port.

This 9-pin COM1 port is for pointing devices and other

serial devices.

3. IEEE 1394a port.

This 6-pin IEEE 1394a port provides high-speed

connectivity for audio/video devices, storage peripherals, PCs, or portable

devices.

4. LAN 1/2 (RJ-45) port.

Supported by Marvell

88E1116 Gigabit LAN

controller, this port allows Gigabit connection to a Local Area Network

(LAN) through a network hub. Refer to the table below for the LAN port LED

indications.

LAN port LED indications

5. Center/Subwoofer port (orange).

This port connects the center/subwoofer

speakers.

6. Rear Speaker Out port (black).

This port connects the rear speakers in a

4-channel, 6-channel, or 8-channel audio configuration.

7. Line In port (light blue).

This port connects the tape, CD, DVD player, or

other audio sources.

8. Line Out port (lime).

This port connects a headphone or a speaker. In

4-channel, 6-channel, and 8-channel configuration, the function of this port

becomes Front Speaker Out.

SPEED

LED

ACT/LINK

LED

LAN port

Activity/Link Speed LED
Status

Description

Status

Description

OFF

No link

OFF

10 Mbps connection

ORANGE

Linked

ORANGE

100 Mbps connection

BLINKING

Data activity

GREEN

1 Gbps connection

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands