Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 106

Page: 106 / 184

4-36

Chapter 4: BIOS setup

4.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically

detected by the BIOS. It also allows you to change CPU Q-Fan feature-related

parameters. Select an item then press <Enter> to display the configuration options.

CPU Q-Fan Control [Disabled]

Allows you to enable or disable the CPU Q-Fan controller.

Configuration options: [Disabled] [Enabled]

The

CPU Q-Fan Profile

item becomes use-configurable when you enable the

CPU Q-Fan Control

item.

CPU Q-Fan Profile [Performance]

Allows you to set the appropriate performance level of the CPU Q-Fan. When

set to [Optimal], the CPU fan automatically adjusts depending on the CPU

temperature. Set this item to [Silent] to minimize fan speed for quiet CPU fan

operation, or [Performance] to achieve maximum CPU fan speed.

Configuration options: [Performance] [Optimal] [Silent]

Chassis Q-Fan Control [Disabled]

Allows you to enable or disable the chassis Q-Fan controller.

Configuration options: [Disabled] [Enabled]

The succeeding item becomes user-configurable when you set the

Chassis

Q-Fan Control

item to [Enabled].

Select Menu

Item Specific Help

Press

[Enter] to

enable or disable.

Hardware Monitor

CPU Q-Fan Control

[Disabled]

x CPU Q-Fan Profile

Performance

Chassis Q-Fan Control

[Disabled]

x Chassis Q-Fan Profile

Performance

Vcore Voltage

[ 1.39V]

3.3V Voltage

[ 2.76V]

5V Voltage

[ 4.48V]

12V Voltage

[11.32V]

CPU Temperature

42ºC

M/B Temperature

41ºC

CPU FAN Speed

3068 RPM

CHA_FAN1 Speed

0 RPM

CHA_FAN2 Speed

0 RPM

CHA_FAN3 Speed

0 RPM

CHA_FAN4 Speed

0 RPM

PWR_FAN Speed

0 RPM

CHIP_FAN Speed

0 RPM

CPU Fan Speed warning

[ 800 RPM]

Phoenix-AwardBIOS CMOS Setup Utility

Power

F1:Help

↑↓

: Select Item

-/+: Change Value F5: Setup Defaults

ESC: Exit

→←

: Select Menu

Enter: Select SubMenu F10: Save and Exit

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands