Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 59

Page: 59 / 184

ASUS

M2N32-SLI Premium Vista Edition

2-31

9. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to fit these connectors in only one orientation. Find the proper

orientation and push down firmly until the connectors completely fit.

8. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with

a jumper cap. Remove the jumper caps only when you intend to use the

chassis intrusion detection feature.

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
Chassis intrusion connector

CHASSIS

(Default)

+5VSB_MB

Chassis Signal

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
ATX power connector

+12V DC

GND

ATX12V

EATXPWR

+3 Volts

Ground

+5 Volts

Ground

+5 Volts

Ground

Power OK

+5V Standby

+12 Volts

+3 Volts

-12 Volts

Ground

PSON#

Ground

-5 Volts

+5 Volts

Ground

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands