Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 35

Page: 35 / 184

ASUS

M2N32-SLI Premium Vista Edition

2-7

2.3.1

Installing the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

Make sure that the socket lever is lifted up to a 90º angle; otherwise, the CPU

will not fit in completely.

2. Unlock the socket by pressing the

lever sideways, then lift it up to a

90º angle.

2.3

Central Processing Unit (CPU)

The motherboard comes with a 940-pin AM2 socket designed for the Athlon

™

X2/Athlon

™

64/Athlon

™

64FX/Sempron

™

processor.

Socket lever

The AM2 socket has a different pinout from the 940-pin socket designed for

the AMD Opteron processor. Make sure you use a CPU designed for the AM2

socket. The CPU fits in only one correct orientation. DO NOT force the CPU into

the socket to prevent bending the connectors on the socket and damaging the

CPU!

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
CPU Socket AM2

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands