Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 29

Page: 29 / 184

ASUS

M2N32-SLI Premium Vista Edition

2-1

Onboard LED

The motherboard comes with a standby power LED. The green LED lights up

to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a

reminder that you should shut down the system and unplug the power cable

before removing or plugging in any motherboard component. The illustration

below shows the location of the onboard LED.

2.1

Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or to a metal

object, such as the power supply case, before handling components to

avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

M2N32-SLI PREMIUM

M2N32-SLI PREMIUM
Onboard LED connector

SB_PWR

Standy

Power

Powered

Off

OFF

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands