Asus M2N32-SLI PREMIUM VISTA User Manual Download Page 75

Page: 75 / 184

ASUS M2N32-SLI Premium Vista Edition

4-5

To update the BIOS using EZ Flash 2:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for

the motherboard.

2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the

system.

4.1.3

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a floppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

(2) Enter BIOS setup program. Go to the

Tools

menu to select

EZ Flash2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file

is found. Then press <Enter>.

3. You can launch the EZ Flash 2 by two methods.

(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the

floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

ASUSTek EZ Flash 2 BIOS ROM Utility B318

FLASH TYPE: Winbond W39V080A 8Mb LPC

BOARD: M2N32-SLI PREMIUM

VER: 0107

DATE: 12/25/2006

Current ROM

Update ROM

BOARD: Unknown

VER: Unknown

DATE: Unknown

PATH: A:\

Note

[Enter] Select [S] Save [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move

• This function can support devices such as USB flash disk, hard disk, or

floppy disk

with FAT 32/16/12 format only

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands