Asus M2N32-SLI PREMIUM VISTA User Manual Download

Page: 162 / 184

5-42

Chapter 5: Software support

5.5.2

NVIDIA

MediaShield RAID configurations

The motherboard includes a high performance RAID controller integrated in the

NVIDIA

nForce

™

590 SLI southbridge chipset. It supports RAID 0, RAID 1, RAID

0+1, RAID 5 and JBOD for six independent Serial ATA channels.

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID items in

the BIOS before setting your RAID configuration.

To set the BIOS RAID items:

1. Boot the system and press <Del> during the Power-On Self-Test (POST) to

enter the BIOS Setup Utility.

2. From the Main > Serial ATA Configuration menu item in the BIOS set the

nVidia RAID Function item to Enabled.

3. Select and enable the SATA drive(s) that you want to configure as RAID. See

section “4.4.7 Onboard Device Configuration” for details.

4. Save your changes and Exit Setup.

• For detailed descriptions on the NVIDIA

RAID configuration, refer to the

“NVIDIA

RAID User’s Guide” found in your motherboard support DVD.

• When using Windows 2000 operating system, make sure to install the

Windows 2000 Service Pack 4 or later versions.

Make sure to re-enter your NVRAID settings after the CMOS is cleared;

otherwise, the system will not recognize your RAID setup.

Summary of Contents for M2N32-SLI PREMIUM VISTA

























































































































































































Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands

Asus M2N32-SLI PREMIUM VISTA, User Manual

Search results

Summary of Contents for M2N32-SLI PREMIUM VISTA

Reviews:

Related manuals for M2N32-SLI PREMIUM VISTA

Brands by name

Popular brands