6-28
Chapter 6: RAID Configuration
5.
Use the up/down arrow keys to select a drive, press <TAB> to select a Master disk, and
then press <SPACE> to select a Recovery disk. A small triangle marks the selected
drive. Press <Enter> after completing your selection.
6.
When the
Sync
item is selected, use the up/down arrow keys to select a sync option
that you want and press <Enter>.
7.
When the
Create Volume
item is selected, press <Enter>. The following warning
message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
8.
Press <Y> to create the recovery set and return to the main menu, or <N> to go back
to the
CREATE VOLUME
menu.
If a recovery set is created, you cannot add more RAID sets even when you have more
non-RAID disks installed in your system.
2.
Enter a name for the recovery set and press <Enter>.
3.
When the
RAID Level
item is selected, press the up/down arrow keys to select
Recovery
, and then press <Enter>.
4.
When the
Disks
item is selected, press <Enter> to select the hard disk drives you want
to include in the recovery set. The
SELECT DISKS
screen appears.
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Non-RAID Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Non-RAID Disk
2 ST3300656SS 397600009846UEDY 279.3GB Non-RAID Disk
3 ST3300656SS GWC50000991756G6 279.3GB Non-RAID Disk
Select 1 Master and 1 Recovery disk to create volume.
[[
↑↓
]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
Summary of Contents for ESC8000 G3
