Asus ESC8000 G3 User Manual Download Page 33

Page: 33 / 206

2-11

ASUS ESC8000 G3

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes

or touches your skin, wash it off immediately and seek professional medical help.

Repeat step 5 - 16 to install the other CPU.

•

Ensure that the Thermal Interface Material is spread in an even thin layer.

•

Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step.

16. Apply some Thermal Interface Material to the exposed area of the CPU that the

heatsink will be in contact with.

15. Push down the left load lever (L) then insert it under the retention tab (M).

Retention tab

Summary of Contents for ESC8000 G3















































































































































































































Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands

Asus ESC8000 G3, User Manual

Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands