Asus ESC8000 G3 User Manual Download Page 195

Page: 195 / 206

ASUS ESC8000 G3

7-19

5. Click

Install Drivers and Software

option to begin installation.

7.5

Installing the Intel

I210 Gigabit Adapters driver

This section provides the instructions on how to install the

Intel

I210 Gigabits Adapter

Driver

on the system.

To install the

Intel

I210 Gigabi

Adapters Driver

on the Windows

operating system:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

From the

Drivers

menu, click

Intel

I350-AM4/I350-AM2/I210/X540-BT2 Gigabit

Adapters Drivers

to start the installation.

Summary of Contents for ESC8000 G3















































































































































































































Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands

Asus ESC8000 G3, User Manual

Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands