Asus ESC8000 G3 User Manual Download Page 70

Page: 70 / 206

4-10

Chapter 4: Motherboard Information

System fan connectors (4-pin CPU_FAN1-4, FRNT_FAN1–8, HDD_FAN1-2)

The fan connectors support cooling fans of 3.30 A - 3.95 A (47.4 W maximum).

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

All fans feature the ASUS Smart Fan technology.

•

FRNT_FAN2, FRNT_FAN4, FRNT_FAN6, and FRNT_FAN8 are backup fans only.

•

When FRNT_FAN1, FRNT_FAN3, FRNT_FAN5, and FRNT_FAN7 does not work, the

system activates FRNT_FAN2, FRNT_FAN4, and FRNT_FAN6, and FRNT_FAN8.

Summary of Contents for ESC8000 G3















































































































































































































Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands

Asus ESC8000 G3, User Manual

Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands