Asus ESC8000 G3 User Manual Download Page 189

Page: 189 / 206

ASUS ESC8000 G3

7-13

7.2

Management applications and utilities
installation

When you place the support DVD into the optical drive, the DVD automatically displays

the main screen if Autorun is enabled in your computer. By default, the Drivers tab is

displayed.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

run the support DVD.

7.3

Running the Support DVD

•

The contents of the support DVD are subject to change at any time without notice.

Visit the ASUS website (www.asus.com) for the latest updates on software and

utilities.

•

The support DVD is supported on Windows

Server 2008 R2 and Windows

Server 2012.

The support DVD that is bundled with your motherboard contains drivers, management

applications, and utilities that you can install to maximize the features of your

motherboard.

The main screen of the Support DVD contains the following tabs:

1. Drivers

Utilities

3. MakeDisk

4. Manual

5. Contact

The main screen of the Support DVD looks exactly the same on the Windows

Server

2008 R2 and on the Windows

Server 2012 Operating System (OS).

Summary of Contents for ESC8000 G3















































































































































































































Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands

Asus ESC8000 G3, User Manual

Search results

Summary of Contents for ESC8000 G3

Reviews:

Related manuals for ESC8000 G3

Brands by name

Popular brands